Presumably, residents living on high floors or friends who have large windows at home have bothered about cleaning the window glass. If you want to clean it yourself, you need to fetch water and a cleaning cloth. The glass is difficult to wipe clean and the upper floors are very dangerous; it is very convenient to find a cleaning staff, but the price is also very high.
In this intelligent era where even mobile phones and stereos can chat with us, smart sweeping robots can do the work for sweeping the floor, and a special window cleaning robot will inevitably be born.
Today, we will take everyone to take a look at the newly developed intelligent window cleaning robot-HUTT intelligent variable frequency window cleaning robot W66. It is equipped with an electronically controlled water tank, which can automatically spray water; and can intelligently plan cleaning lines and adjust suction.
UNPACKING AND APPEARANCE
A simple carton outer box. After opening the carton, you can see a storage box with cloth patterns.
Open the storage box, the top is a HUTT W66 Manual. The operation method of W66 is described above.
Take out all the accessories. Main unit, rag, safety rope, power cord and remote control. In addition to the one already on the machine, three rags are included. The power cord and safety rope are quite long and are sufficient for use. But the line length is also not easy to manage.
The front of the main unit is very simple. There is only an on/off button and a water injection hole. The design of the handshake part is more ergonomic, and the weight of the host is very light, so there is no problem with one-handed operation. The main unit’s measurements are only 228mm*228mm*73mm, and the body thickness is only 73mm. Don’t worry about not being able to hold it. There is no longer a sweating window cleaning, and housework can be done elegantly.
The back structure of the main unit is also very simple. There is a red start button; there is also a gray waterproof plug. After opening it is a USB port, which may be used to upgrade the system firmware in the future.
W66 can realize electronically controlled water spray because it has a built-in 150ml water tank. On the back of the host, you can see 8 water outlets. According to official propaganda, 70-80 square meters of glass can be cleaned after the water tank is full. And because of this water tank, you don’t need to wet the rag or glass in advance, just press the “water spray” switch on the remote control, which is simple, convenient, quick and intelligent. (Note: Only non-corrosive cleaning products such as clean water and glass water can be filled in the water tank. When there is no water in the water tank, the host will intelligently remind; when there is no water in the water tank, the host can also dry wipe the glass normally.)
W66 has also upgraded the surrounding wheels. The edge detection sensor using the laser module can judge various common window edge materials. The boundary position can be accurately judged, and the coverage is more complete. (According to personal advice: try not to use it on frameless glass or windows with relatively small frame drop when dry wiping. It will increase the risk of falling)
It is worth mentioning that W66 supports UPS anti-power failure/anti-drop function. Because it has a built-in 650mAh battery, after an accidental power failure, it can be absorbed for 20-30 minutes and continue to alarm. At the same time, it is equipped with a climbing-level safety rope lock to protect the safety of high-rise window cleaning.
Voice interaction is a function that every smart product should have, and W66 is no exception. It will take the initiative to use “cleaning start”, “pause”, “please remove the machine” and other voice broadcasts, and feedback the progress to you. Let you keep track of the progress of cleaning up in real time.
Connect the power cord and safety rope to the host, and install the rag on the back of the host (note: the rag can not be used directly after washing, otherwise it will slip). Pour clean water from the water injection hole. (Maybe for waterproof considerations, the rubber stopper is a bit too tight. Hope it can be improved later)
W66 can automatically recognize glass. After turning on the switch, it will automatically be adsorbed on the glass. The large suction power of 2600PA ensures its safety.
This is the window of our house. It has not been cleaned for a long time. Compare the effects. The bottom is already wiped, the top is being wiped, and it is still quite clean. The glass of 4 square meters will be wiped in about 10 minutes.
This is a comparison chart before/after cleaning with a rag.
W66 supports intelligent planning of cleaning routes. One-key automatic wiping is completed, and it will automatically return to the original position after wiping, which is convenient to take.
With the rapid development of science and technology, many tedious housework in our daily lives are gradually being replaced by smart products. This allows us to free up more time to work or enjoy life. After the function upgrade, HUTT intelligent variable frequency window cleaning robot W66, compared with previous generations of intelligent window cleaning machines, has added an electronically controlled water tank function, which not only improves the cleaning effect, but also reduces the time of manual participation. If you are a lazy person or you live in a high-rise building, I believe W66 can help you solve the problem of cleaning windows.
Where could I buy it? Link to the product: